MICRO SPACE HEAT™

See Tips Below

  Solar Window Warmer Materials Needed

Note: These work well on the inside of the window, but much better if placed between the glass & screen on the outside of the window & even may reduce some window moisure.

Also: These directions are for double hung windows.

You can adapt them for any other window arrangement.

ALSO: The Materials & Directions Are For Cafe Window Warmers So That There Is Light From The Top of The Window.

- for 1 approx. 36" by 32 " window

1. Approx. 12 - 1/2" Pipe Insulation -

(Warning: These Solar Pipes are made of polyethylene & are not to be used for human consumption.)

2. Black Cotton Yarn or ? for Ties - 3. Scissors to cut pipes & yarn.

4. Optional: 1" by 36' longfelt strips to string through the pipe openings for additional insulation & moisture absorbency

Solar CAFE Window Warmer Directions

1. Cut Solar Pipes with scissors to cover bottom 1/2 of window glass only. This is so that you still have light coming in the window & also to see out.

2. Tie 1 pipe to another in 3 places...2 at each end & 1 in the middle - so you have 3 loops on each pipe. Trim ties to 1/2" from knot. Repeat to desired length of warmer.

3. Cut 10-12" Ties. Tie 1 string strand of yarn to 1 end loop, loop under & over middle loop & tie to end loop & tie off 3 times, i.e., 3 knots. This string strand will secure loops so that they do not fall off.

4. At the top tie a string strand of yarn - about 3 strands - on 1 end loop & also on the other end.

5. Make a knot loop in the center to join to the window sash hardware.

6. Repeat for other windows.

7. There should be a noticible difference, especially when the wind blows.

Solar Window Cover Directions:

These Are Also CAFE.

Note: Plastic is the best material to use. Cloth material can be used but will not have the same properties as plastic so will probably not be as effective.

Materials Needed

for 36" x 32" approx window

1. 1 30 gallon BLACK plastic garbage bag.

2. 2 13 gallon WHITE plastic garbage bags.

3. Glue Stick

4. Reflectix Radiant Barrier

Directions:

1. Glue 2 white plastic bags to the black 1 on 1 side. Folding will be necessary.

2. Cut Reflectix to fit inside of black garbage bag.

3. Open window & place on window sill behind the Solar Window Warmer.

4. Viva la difference! on a cold windy day.

TIPS

2. For Double Hung Window Moisture on the Sash. Lay a 1/2 inch Foam Pipe Insulation across the Sash. The Warmth from the Outside (Sun's Rays) will Help Keep Your Sash Dry.

Solar Window Warmer Ready Mades

 

© 2006-2010 Joan's Company -Educational Materials & Marketing Services -Since 1988- -AMDG- All rights reserved .

www.livelikeacamper.com www.ourlittlebrotherslanterns.com www.tweetteams.com